Currently viewing the category: "Tips"

Here is a quick run demonstration of doing a very basic irrigation layout with IrriMaker. With a new project open: 1. Click the Irr button in the left menu bar. 2. From the Nodes tab, click Add Single. You will be presented with a Node Type dialog box: 1. From the Item menu, select Pump. […]

Continue Reading

In IrriMaker  you can easily have the laterals in the block follow an arc. 1. Draw the outline of your irrigation block with cadlines. Perhaps you need an arc because your block is right next to a pivot. Whatever the case is, its easiest to have your block drawn in cad so that the actual […]

Continue Reading

In IrriMaker you can view your data in 3D easily. One way is to make use of our new Point Cloud Viewer. To make use of this utility, follow these steps. 1. Download the MMS Point Cloud Viewer from here. After the download finished, run the downloaded file. 2. The MMS Point Cloud Viewer utility […]

Continue Reading

In IrriMaker Cad Layers can easily be used to display only what you want.   1. In order to utilize Layers, elements have to be on specific layers. Newly created elements will be on the Cad layer or the last used layer. To place an element on a different layer, click on the pencil button from […]

Continue Reading

Quicktip #10 Slope Analysis

On February 21, 2012 By

1 Fill Type and Colors Model Maker analyzes a model’s slope quickly and automatically by checking the maximum slope and direction of each triangle. Choose one of the following methods to display the model: 1. Full fill                : A bitmap will be created indicating the slope. Colour1 shows […]

Continue Reading

With Irrimaker you can easily divide an Irrigation Block into other Blocks automatically. In today’s quicktip we have a block that is 1ha or 10,000 m2. Dividing this block into 10 smaller individual ones can be done in a few steps. Click the Auto button on the Blocks tab with the given block selected. The […]

Continue Reading

It’s a new month! 2011 is turning out to be a good one. Today we would like to show the Irrigation Designer how to obtain the heights of nodes from the underlying DTM . In Irrimaker the irrigation node interpolates its elevation when initially placed on a DTM model. If the model is not available, […]

Continue Reading

Welcome to Irrimaker Irrigation Software’s quick tip #7. Today we would like to show the Irrigation Designer especially a way to visually and numerically present the sprinkler pressures of a design as the heights of DTM points. Once you have an already designed Irrigation block you can proceed.   Find your way to the Irrigation […]

Continue Reading

In today’s time Irrigation Software can easily be used along with Open Source Applications. As a result we are excited about today’s tip. In recent updates Irrimaker’s ability to work along with Google Earth has improved tremendously. Now the Irrigation Designer can easily make use of the survey data provided by google earth to create […]

Continue Reading

Welcome to part two of  “The Speed Toggle Menu” quick tip. 9. Toggle Paper Windows   10. Toggle Cad Elements   11. Toggle Only Identified Cad Elements This requires two steps. First you would identify some Cad elements. Then you can easily show only those elements with the toggle button. 12. Toggle Cad Line Endpoints […]

Continue Reading

Looking for something?

Use the form below to search the site:


Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...

    Set your Twitter account name in your settings to use the TwitterBar Section.